Masuk 500 Besar Asia, Rektor University Malaya Puji Prestasi USK
Rektor University Malaya Professor Dato’ Ir. Dr. Mohd Hamdi Abd Shukor memberikan apresiasi atas pencapaian Universitas Syiah Kuala yang telah berkembang cukup baik dalam beberapa tahun terakhir. Hal tersebut disampaikan Prof. Hamdi saat memberikan kuliah umum secara daring dengan tema Learning Motivation and Research Development at University Malaya, kepada Civitas Akademika USK. Banda Aceh, Senin (1/32021). Menurut Prof. Hamdi, salah satu indikator keberhasilan USK dapat dilihat dari keberhasilan perguruan tinggi ini masuk 500 rangking Asia.
Masuk Perguruan Tinggi Wajib Miliki Akun LTMPT
Kebijakan tentang seleksi masuk Perguruan Tinggi Negeri (PTN) di Indonesia terus diperbarui dan disempurnakan. Saat ini seleksi masuk dilakukan serentak melalui satu pintu oleh Lembaga Tes Masuk Perguruan Tinggi (LTMPT). Lembaga ini diberi mandat oleh Menteri Pendidikan dan Kebudayaan (Mendikbud) untuk menyelenggarakan Seleksi Masuk Perguruan Tinggi Negeri (SNMPTN) pada 11-25 Februari 2019, pendaftaran Ujian Tulis Berbasis Komputer (UTBK) pada 30 Maret-11 April 2020, dan pendaftaran Seleksi Bersama Masuk Perguruan Tinggi (SBMPTN) pada 2-13 Juni 2020.
Mate-guarding constrains feeding activity but not energetic status of wild male long-tailed macaques (Macaca fascicularis)
Anda ingin mendapat kerja atau memperoleh beasiswa? silakan ikuti JobFair & EduExpo 2016 yang dilaksanakan Career Development Centre (CDC) di AAC Dayan Dawood, Unsyiah.
kegiatan ini tak hanya mengakomodir lulusan Unsyiah, tetapi juga alumni institusi lain, mulai dari SLTA, S1 dan S2. Pada even ini, banyak perusahaan akan menyeleksi calon karyawan, di antaranya PT Semen Indonesia, DataScrip, PT Wings, Paragon, dan Bank BTPN Syariah.
Ketua Program Studi (Kaprodi) Pendidikan Sejarah Fakultas Keguruan dan Ilmu Pendidikan Universitas Syiah Kuala (FKIP-Unsyiah), Drs Mawardi MHum MA ditunjuk menjadi direktur Pusat Dokumentasi an Informasi Aceh (PDIA).
Direktur PDIA, Drs Mawardi MHum MA kepada Serambi, Jumat (16/9) mengatakan, dirinya berupaya menjadikan PDIA sebagai lembaga penting dalam menjaga warisan budaya Aceh. Menurutnya, warisan budaya itu tidak akan berguna jika tidak terdokumentasi dengan baik. “Warisan budaya itu tidak untuk disimpan saja, tapi dipelajari dan dikenang oleh masyarakat.
Measurement of concrete strength using the emission intensity ratio between Ca(II) 396.8 nm and Ca(I) 422.6 nm in a Nd:YAG laser-induced plasma
Measuring a level of water pollution in sungai pinang using a mathematical model
Mathematical models are now a popular tool in many applications such as physics, economics and engineering; and provide useful information for decision making and planning. Water pollution in Malaysia has reached a level that needs attention and intervention from environmental department and government. In order to make a strong case, this paper has done a study on measuring the pollution level of Sungai Pinang which is located in Penang Island, Malaysia. Advection-Dispersion equation is one of the mathematical models that often use in evaluating the level of water pollution in the river. This paper applies this model and compares the result of this study with the studies done in the previous research worldwide to evaluate the severity of the pollution. The authors hope that this paper will create awareness to relevant department and also to community in general
Mahamud, Mohd Amirul; Centre for Foundation Studies, Albukhary International University, Kedah
Ramasamy, Rajasegeran; Centre for Foundation Studies, Albukhary International University, Kedah
Proceedings of The Annual International Conference, Syiah Kuala University - Life Sciences & Engineering Chapter; Vol 3, No 2 (2013): Engineering
Mechanical Analysis Of Limestone In Jaya, Lhong, And Lhoknga
Research about mechanical analysis of limestone in District Jaya, Lhong, and Lhoknga has been done from Dec. 2011 to Mei 2012. This study aim is to classify the limestones based on physical and mechanical tests as well as identify opportunities limestone utilization in accordance with the SII 0378-80 as a condition of quality natural stone for building. Research have been done by testing compressive strength, modulus Young, wear, specific gravity, porosity, and absorption. The result shows that the limestones are qualified natural stone for building the foundation, curbstone, stone and ornamental stone or paste.
Journal of Aceh Physics Society; Volume 1 2012
Mechanical Analysis of Serpentinite rock in Indrapuri, Tangse, and Beutong
Aceh is one of province that has abundant natural resources, which consist of natural resources which can be renewed or not renewed. With the increasing human population, especially in Indonesia, resulting in increasing human needs of various sectors, particularly in the construction sector. In the development activities required a lot of materials-minerals, such as sandstone, limestone, serpentinite rock which serves for a variety of needs in development activities. In District Indrapuri (Aceh Besar Regency), Tangse (Pidie Regency), and Beutong (Nagan Raya Regency) finding of the serpentinite rock is abundance. Meanwhile, in line with the rapid physical development in Aceh and its surroundings, then the needs of rock as building materials will increase as well. Research done by physical properties (specific gravity, absorption, porosity), and mechanical properties (testing compressive strength, wear/abrassion) of serpentinite rock to determine its quality as a building material. The results show that the serpentinite rock contained in District Indrapuri, Tangse, and Beutong for the building according SII 0378-80 is qualified for the foundation, curb stones, and ornamental stones or paste stones.
Mechanism of cavitation-induced atomization in two-dimensional nozzles
It has been pointed out that cavitation, i.e., super cavitation regime may occur in a nozzle of pressure atomizers, and may influence atomization of a liquid jet discharged from the 2D nozzle. Once we clarify the mechanism of atomization induced by the supercavitation, we will be able to develop new atomizers in which the atomization mechanism is utilized more efficiently. Hence, this study has been conducted to clarify the mechanism in the 2D nozzle. As a result, the following conclusions are obtained: (1) The frequency of the shedding and collapse of cavitation clouds in the supercavitation regime agrees with that of strong turbulence near the exit; (2) When the trace of a cavitation cloud comes out of the 2D nozzle, a ligament is formed at the liquid jet interface; (3) Strong turbulence is produced by the collapse of cavitation clouds near the exit of the 2D nozzle.and induces ligament formation, which, in turn, causes liquid jet atomization.
Maulana, Muhammad Ilham; Department of Mechanical Engineering, Syiah Kuala University, Banda Aceh 23111
Proceedings of The Annual International Conference, Syiah Kuala University - Life Sciences & Engineering Chapter; Vol 2, No 2 (2012): Engineering